Lombard, IL grease trap & interceptor requirements
Quoted from official source Last checked 2026-10-17. Report an error / rule changed
Quick answer
- How often to pump: not stated in the sources we checked
- Interceptor minimum / sizing: not stated in the sources we checked
- Permit / fees: not stated in the sources we checked
Rules change; verify with your city. Summaries are plain-English restatements of the official source linked below; “Source says” shows the exact wording. Blank rows mean the sources we checked did not state that rule, not that there is no rule.
| Required trap / interceptor type | Source says: “This code shall not prohibit the installation of two grease interceptors installed in a parallel system as long as each interceptor is properly sized as required in Section 890.510 (a)(2)(i) for the connected fixture holding capacity.” |
|---|---|
| Sizing rule | Source says: “For the purpose of sizing a hydro mechanical grease interceptor the resulting units are taken as gallons per minute, and for the purpose of sizing a gravity grease interceptor, as gallons.” |
| Pumping / cleaning frequency | Not stated in the sources we checked |
| Permit required? | Not stated in the sources we checked |
| Permit & program fees | Not stated in the sources we checked |
| Inspections | Not stated in the sources we checked |
| Record keeping | Not stated in the sources we checked |
| Pumper / hauler approval | Not stated in the sources we checked |
| Reporting portal | Not stated in the sources we checked |
| Fines & penalties | Not stated in the sources we checked |
| Program contact | Not stated in the sources we checked |
Sources
- https://library.municode.com/il/lombard/codes/code_of_ordinances?nodeId=TITXVLAUS_CH150BUCO_ARTVIILSTPLCO_S150.050ADREAM · checked 2026-10-17
Find a grease trap pumper in Lombard
Compare pumpers that service Lombard. Directory coming soon.
Get notifiedPump grease traps in Lombard?
Put your company in front of restaurants checking these rules. Featured listing (paid) – coming soon.
List your companySize your interceptor
Use the grease interceptor sizing calculator (UPC, IPC and PDI methods), then confirm Lombard's own minimums above. Not sure how often to pump? Read how often to pump a grease trap.
Other Illinois programs
Grease rule changes, once a week
A short email when a city changes its FOG ordinance, pumping schedule, permit fees or reporting portal. Free.