States / Illinois / Glen Ellyn
Glen Ellyn, IL grease trap & interceptor requirements
Quoted from official source Last checked 2026-10-17. Report an error / rule changed
Quick answer
- How often to pump: Every 30 or 90 days (depends on device type)
- Interceptor minimum / sizing: not stated in the sources we checked
- Permit / fees: Permit required
Rules change; verify with your city. Summaries are plain-English restatements of the official source linked below; “Source says” shows the exact wording. Blank rows mean the sources we checked did not state that rule, not that there is no rule.
| Required trap / interceptor type | Source says: “At other required cleaning intervals, skimming of the interceptor is acceptable.” |
|---|---|
| Sizing rule | Not stated in the sources we checked |
| Pumping / cleaning frequency | Pump every 30 or 90 days (depends on device type). Source says“At a minimum, a gravity grease interceptor shall be cleaned at least once every 90 days and hydro-mechanical FOG recovery system shall be cleaned at least once every 30 days.” |
| Permit required? | A permit is required (see source wording). Source says“Haulers must have a valid wastewater discharge permit issued to them prior to commencing discharge.” |
| Permit & program fees | Not stated in the sources we checked |
| Inspections | Grease traps/interceptors are subject to inspection. Source says“The user shall, upon request by the Building and Zoning Official of the Village, or his/her authorized agent(s) or representative(s), open the access to the FOG trap or FOG recovery system for inspection, including, but not limited to, unbolting and removing covers and/or manholes.” |
| Record keeping | Keep pumping and maintenance records (manifests/logs) available for inspection. Source says“The following records shall be kept on-site at the FOG producing facility for a minimum two-year period: .” |
| Pumper / hauler approval | Use an approved / licensed grease hauler. Source says“The POTW shall require any permitted haulers to provide proof of continued liability insurance and proof of continued compliance with any applicable laws and regulations.” |
| Reporting portal | Not stated in the sources we checked |
| Fines & penalties | Not stated in the sources we checked |
| Program contact | Not stated in the sources we checked |
Sources
- https://library.municode.com/il/glen_ellyn/codes/code_of_ordinances?nodeId=TIT7HESA_CH10WASYRE_7-10-9FIHY · checked 2026-10-17
- https://library.municode.com/il/glen_ellyn/codes/code_of_ordinances?nodeId=TIT7HESA · checked 2026-10-17
Find a grease trap pumper in Glen Ellyn
Compare pumpers that service Glen Ellyn and check they meet the city's hauler rules above. Directory coming soon.
Get notifiedPump grease traps in Glen Ellyn?
Put your company in front of restaurants checking these rules. Featured listing (paid) – coming soon.
List your companySize your interceptor
Use the grease interceptor sizing calculator (UPC, IPC and PDI methods), then confirm Glen Ellyn's own minimums above. Not sure how often to pump? Read how often to pump a grease trap.
Other Illinois programs
Grease rule changes, once a week
A short email when a city changes its FOG ordinance, pumping schedule, permit fees or reporting portal. Free.